Last Updated May 25, 2018
Accuracy, Completeness and Timeliness of Information on This Site
Miller Fabrication Solutions is not responsible if information made available on this site is not accurate, complete or current. The material on this site is provided for general information only and should not be relied upon or used as the sole basis for making decisions without consulting primary, more accurate, more complete or more timely sources of information. Any reliance on the material on this site is at your own risk. This site may contain certain historical information. Historical information necessarily is not current and is provided for your reference only. We reserve the right to modify the contents of this site at any time, but we have no obligation to update any information on the site. You agree that it is your responsibility to monitor changes to the site.
Use of Materials on the Site
All content on this site (including, without limitation, text, design, graphics, logos, icons, images, audio clips, downloads, interfaces, code and software, as well as the selection and arrangement thereof), is the exclusive property of and owned by Miller Fabrication Solutions, its licensors or its content providers and is protected by copyright, trademark and other applicable laws. You may access, copy, download and print the material contained on the site for your personal and non-commercial use, provided you do not modify or delete any copyright, trademark or other proprietary notice that appears on the material you access, copy, download or print. Any other use of content on the site, including but not limited to the modification, distribution, transmission, performance, broadcast, publication, uploading, licensing, reverse engineering, transfer or sale of, or the creation of derivative works from, any material, information, software, products or services obtained from the site, or use of the site for purposes competitive to Miller Fabrication Solutions, is expressly prohibited. You agree to abide by all additional restrictions displayed on the site as it may be updated from time to time. Miller Fabrication Solutions reserves the right to refuse or cancel any person’s registration for this site, remove any person from this site or prohibit any person from using this site for any reason whatsoever. Miller Fabrication Solutions, or its licensors or content providers, retain full and complete title to the material provided on the site, including all associated intellectual property rights, and provide this material to you under a license that is revocable at any time in Miller Fabrication Solutions’ sole discretion. Miller Fabrication Solutions neither warrants nor represents that your use of materials on this site will not infringe rights of third parties not affiliated with Miller Fabrication Solutions.
You may not use contact information provided on the site for unauthorized purposes, including marketing. You may not use any hardware or software intended to damage or interfere with the proper working of the site or to surreptitiously intercept any system, data or personal information from the site. You agree not to interrupt or attempt to interrupt the operation of the site in any way. Miller Fabrication Solutions reserves the right, in its sole discretion, to limit or terminate your access to or use of the site at any time without notice. Termination of your access or use will not waive or affect any other right or relief to which Miller Fabrication Solutions may be entitled at law or in equity.
Materials You Submit
You acknowledge that you are responsible for any material you may submit via the site, including the legality, reliability, appropriateness, originality and copyright of any such material. You may not upload to, distribute or otherwise publish through this site any content that (i) is confidential, proprietary, false, fraudulent, libelous, defamatory, obscene, threatening, invasive of privacy or publicity rights, infringing on intellectual property rights, abusive, illegal or otherwise objectionable; (ii) may constitute or encourage a criminal offense, violate the rights of any party or otherwise give rise to liability or violate any law; or (iii) may contain software viruses, political campaigning, chain letters, mass mailings, or any form of “spam.” You may not use a false email address or other identifying information, impersonate any person or entity or otherwise mislead as to the origin of any content. You may not upload commercial content onto the site.
Conduct on the Site
Some features that may be available on this site require registration. By registering at and in consideration of your use of the site you agree to provide true, accurate, current and complete information about yourself.
Some features on this site require use of a password. You are responsible for protecting your password. You agree that you will be responsible for any and all statements made, and acts or omissions that occur, through the use of your password. If you have any reason to believe or become aware of any loss, theft or unauthorized use of your password, notify Miller Fabrication Solutions immediately. Miller Fabrication Solutions may assume that any communications Miller Fabrication Solutions receives under your password have been made by you unless Miller Fabrication Solutions receives notice otherwise.
You or third parties acting on your behalf are not allowed to frame this site or use our proprietary marks as meta tags, without our written consent. These marks include, but are not limited to, Miller Welding & Machine Company, Miller Welding & Machine, MWM, Miller Welding, Miller Fabrication Solutions, MFS, Manufacturing Momentum, Helping OEMs Forge Product Innovation. You may not use frames or utilize framing techniques or technology to enclose any content included on the site without Miller Fabrication Solutions’ express written consent. Further, you may not utilize any site content in any meta tags or any other “hidden text” techniques or technologies without Miller Fabrication Solutions’ express written consent.
This site may contain links to other Web sites, some of which are operated by Miller Fabrication Solutions or its affiliates and others of which are operated by third parties. These links are provided as a convenience to you and as an additional avenue of access to the information contained therein. We have not necessarily reviewed all the information on those other sites and are not responsible for the content of those or any other sites or any products or services that may be offered through those or any other sites. The inclusion of links to other sites should not be viewed as an endorsement of the content of linked sites. Different terms and conditions may apply to your use of any linked sites. Miller Fabrication Solutions is not responsible for any losses, damages or other liabilities incurred as a result of your use of any linked sites.
Trademarks and Copyrights
Trademarks, logos and service marks displayed on this site are registered and unregistered trademarks of Miller Fabrication Solutions, its licensors or content providers, or other third parties. All of these trademarks, logos and service marks are the property of their respective owners. Nothing on this site shall be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark, logo or service mark displayed on the site without the owner’s prior written permission, except as otherwise described herein. Miller Fabrication Solutions reserves all rights not expressly granted in and to the site and its content. This site and all of its content, including but not limited to text, design, graphics, interfaces, and code, and the selection and arrangement thereof, is protected as a compilation under the copyright laws of the United States and other countries.
YOUR USE OF THIS SITE IS AT YOUR SOLE RISK. THE SITE IS PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS. WE RESERVE THE RIGHT TO RESTRICT OR TERMINATE YOUR ACCESS TO THE SITE OR ANY FEATURE OR PART THEREOF AT ANY TIME. MILLER FABRICATION SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTIES THAT MATERIALS ON THE SITE ARE NONINFRINGING, AS WELL AS WARRANTIES IMPLIED FROM A COURSE OF PERFORMANCE OR COURSE OF DEALING; THAT ACCESS TO THE SITE WILL BE UNINTERRUPTED OR ERROR-FREE; THAT THE SITE WILL BE SECURE; THAT THE SITE OR THE SERVER THAT MAKES THE SITE AVAILABLE WILL BE VIRUS-FREE; OR THAT INFORMATION ON THE SITE WILL BE COMPLETE, ACCURATE OR TIMELY. IF YOU DOWNLOAD ANY MATERIALS FROM THIS SITE, YOU DO SO AT YOUR OWN DISCRETION AND RISK. YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIALS. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM MILLER FABRICATION SOLUTIONS OR THROUGH OR FROM THE SITE SHALL CREATE ANY WARRANTY OF ANY KIND. MILLER FABRICATION SOLUTIONS DOES NOT MAKE ANY WARRANTIES OR REPRESENTATIONS REGARDING THE USE OF THE MATERIALS ON THIS SITE IN TERMS OF THEIR COMPLETENESS, CORRECTNESS, ACCURACY, ADEQUACY, USEFULNESS, TIMELINESS, RELIABILITY OR OTHERWISE.
IN CERTAIN JURISDICTIONS, THE LAW MAY NOT PERMIT THE DISCLAIMER OF WARRANTIES, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY
YOU ACKNOWLEDGE AND AGREE THAT YOU ASSUME FULL RESPONSIBILITY FOR YOUR USE OF THE SITE. YOU ACKNOWLEDGE AND AGREE THAT ANY INFORMATION YOU SEND OR RECEIVE DURING YOUR USE OF THE SITE MAY NOT BE SECURE AND MAY BE INTERCEPTED BY UNAUTHORIZED PARTIES. YOU ACKNOWLEDGE AND AGREE THAT YOUR USE OF THE SITE IS AT YOUR OWN RISK AND THAT THE SITE IS MADE AVAILABLE TO YOU AT NO CHARGE. RECOGNIZING SUCH, YOU ACKNOWLEDGE AND AGREE THAT, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, NEITHER MILLER FABRICATION SOLUTIONS NOR ITS AFFILIATES, SUPPLIERS OR THIRD PARTY CONTENT PROVIDERS WILL BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, EXEMPLARY, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGES ARISING OUT OF OR IN ANY WAY RELATED TO THE SITE, OR ANY OTHER SITE YOU ACCESS THROUGH A LINK FROM THIS SITE OR FROM ANY ACTIONS WE TAKE OR FAIL TO TAKE AS A RESULT OF COMMUNICATIONS YOU SEND TO US, OR THE DELAY OR INABILITY TO USE THE SITE, OR FOR ANY INFORMATION, PRODUCTS OR SERVICES ADVERTISED IN OR OBTAINED THROUGH THE SITE, OR MILLER FABRICATION SOLUTIONS’ REMOVAL OR DELETION OF ANY MATERIALS SUBMITTED OR POSTED ON ITS SITE, OR OTHERWISE ARISING OUT OF THE USE OF THE SITE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, EVEN IF MILLER FABRICATION SOLUTIONS, ITS AFFILIATES OR ANY OF ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF DAMAGES. THIS DISCLAIMER APPLIES, WITHOUT LIMITATION, TO ANY DAMAGES OR INJURY ARISING FROM ANY FAILURE OF PERFORMANCE, ERROR, OMISSION, INTERRUPTION, DELETION, DEFECTS, DELAY IN OPERATION OR TRANSMISSION, COMPUTER VIRUSES, FILE CORRUPTION, COMMUNICATION-LINE FAILURE, NETWORK OR SYSTEM OUTAGE, YOUR LOSS OF PROFITS, OR THEFT, DESTRUCTION, UNAUTHORIZED ACCESS TO, ALTERATION OF, LOSS OR USE OF ANY RECORD OR DATA, AND ANY OTHER TANGIBLE OR INTANGIBLE LOSS. YOU SPECIFICALLY ACKNOWLEDGE AND AGREE THAT NEITHER MILLER FABRICATION SOLUTIONS NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DEFAMATORY, OFFENSIVE OR ILLEGAL CONDUCT OF ANY USER OF THE SITE. YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY OF THE ABOVE CLAIMS OR ANY DISPUTE WITH MILLER FABRICATION SOLUTIONS IS TO DISCONTINUE YOUR USE OF THE SITE. YOU AND MILLER FABRICATION SOLUTIONS AGREE THAT ANY CAUSE OF ACTION ARISING OUT OF OR RELATED TO THE SITE MUST COMMENCE WITHIN ONE (1) YEAR AFTER THE CAUSE OF ACTION ACCRUES OR THE CAUSE OF ACTION IS PERMANENTLY BARRED. BECAUSE SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OR A PORTION OF THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
Jurisdiction and Applicable Law
Entire Agreement and Admissibility
If any provision of this agreement is unlawful, void or unenforceable, the remaining provisions of the agreement will remain in place.
How to Contact Us
- Emailing us at: firstname.lastname@example.org
- Calling us at: +1 (814) 849-3061 or
- Writing us at:
Data Protection Officer
Miller Fabrication Solutions
111 2nd Street
P.O. Box G
Brookville, PA 15825
Thank you for visiting our site.